Anmol Chemicals is the pioneer manufacturers of Zinc Undecylenate or Undecenoate, Pharmaceutical Excipients Food & Flavor chemicals in India. We offer Halal and Kosher Zinc Undecylenate or Undecenoate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Zinc Undecylenate or Undecenoate is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Kosher & Halal Certified Zinc Undecylenate or Undecenoate USP Grade Manufacturers
CAS Number 557-08-4
Zinc Undecenoate or Undecylenate SDS GHS, MSDS, Material Safety Data Sheet
For Zinc Undecylenate USP please click Zinc Undecylenate USP Grade
For Zinc Undecylenate BP & IP please click Zinc Undecenoate BP IP Grade
Zinc Undecylenate USP Grade Specifications (It is also called Zinc Undecenoate)
C22H38O4Zn 431.92
10-Undecenoic acid, zinc(2+) salt.
Zinc 10-undecenoate [557-08-4].Zinc Undecylenate contains not less than 98.0 percent and not more than 102.0 percent of C22H38O4Zn, calculated on the dried basis.
Identification:
A: Acidify about 5 g with 25 mL of 2 N sulfuric acid, add 20 mL of water, and extract in a separator with two 25-mL portions of ether. Evaporate the ether solution until the odor of ether no longer is perceptible. Add potassium permanganate drop-wise to a 1-mL portion of this residue: the permanganate color is discharged.
B: A 3-mL portion of the residue of undecylenic acid obtained in Identification test A responds to Identification test B under Undecylenic Acid.
C: Dissolve about 100 mg in a mixture of 10 mL of water and 1 mL of ammonium hydroxide, and add a few drops of sodium sulfide: a white, flocculent precipitate of zinc sulfide is formed.Loss on drying: Dry it at 105 for 2 hours: it loses not more than 1.25% of its weight.
Alkalies and alkaline earths: Boil 1.50 g with a mixture of 50 mL of water and 10 mL of hydrochloric acid, filter while hot, and wash the separated acid with about 50 mL of hot water. Render the combined filtrate and washings alkaline with 6 N ammonium hydroxide, add ammonium sulfide to precipitate the zinc completely, dilute with water to 200 mL, mix, and filter. To 100 mL of the clear filtrate add 0.5 mL of sulfuric acid, evaporate to dryness, and ignite over a low flame to constant weight: the weight of the residue does not exceed 7.5 mg (1.0%).Assay:
Boil 50.0 mL of 0.1 N sulfuric acid with about 1 g of Zinc Undecylenate, accurately weighed, for 10 minutes, or until the undecylenic acid layer is clear, adding water, as necessary, to maintain the original volume. Cool, and transfer the mixture, with the aid of water, to a 500-mL separator. Dilute with water to about 250 mL, and extract with two 100-mL portions of solvent hexane. Wash the combined extracts with water until the last washing is neutral to litmus, add the washings to the original water layer, and evaporate on a steam bath to about 100 mL. Cool, add 3 drops of methyl orange, and titrate the excess sulfuric acid with 0.1 N sodium hydroxide. Perform a blank determination. Each mL of 0.1 N sulfuric acid is equivalent to 21.60 mg of C22H38O4Zn.For Original Monographs USP US Pharmacopoeia, please check with the respective web-pages or books.
Manufacturers
Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264e-mail: anmolc@mtnl.net.in
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.
Copyright and Usual Disclaimer is Applicable. 25 February, 2022